SARIC : Chemicals for leather industry
Version française English version
SARIC : Chemicals for leather industry

Saric formulations

Renovation type :
COLOURED SELF FIXING PASTE - FOR SMALL RENOVATIONS


PRODUCTS 1
PATE AUTOFIXANTE 3855 RC 970
PIGMENT OPANOL RC 30
  1000
PROCESS
1°) Stir well the mixture before use and PASTE 3855 RC apply on leather.
2° ) Application by hand : sponge, brush, cotton bud , etc…..
Renovation type :
ANTIC EFFECT ON VEGETAL LEATHER


PRODUCTS 1 2 3
CREME INCOLORE 4056 RC 1000    
mélange de Colorant 400 RC 200/300    
       
FLANCHE INCOLORE 3550 RC   1000  
       
FIXATIF INCOLORE 3388 RC      
  1000 1000 1000
PROCESS
1°) Prepare the mixture n° 1. Stir well.
Apply by hand on leather to get the antic effect.
Let it dry.
2°) When you get the antic effect required, apply one spray-gun with RENOV 4085 RC Let it dry.
3°) Fix with TOP RENOV 3388 RC - one cross by spray-gun. (for a dull effect, add TOP MAT 3627 RC)
Renovation type :
PROCESS TO RENOVATE DAMAGED LEATHERS


PRODUCTS 1 2 3 4 5
DECAPANT RC 1000        
           
Pâte Softy incolore 3528 RC   1000      
           
RENOV 3231 RC     1000    
           
FLANCHE INCOLORE 3550 RC       1000  
PIGMENTS OPANOL RC       180  
           
FIXATIF INCOLORE 3388 RC         1000
           
  1000 1000 1000 1180 1000
PROCESS

1) It is very important to strip off the leather with our solvent DECAPANT 4006 RC. Dry completely until full evaporation of the solvent.

 
2) Buffing paper n° 600 lightly on damaged surface to withdraw the rough parts of the leathers.
3) After cleaning the dust on the damaged surface, apply very thin coats of the SOFTY PASTE 3528 RC, Make it penetrate. Application by hand (always in the same direction). Dry. Buff again lightly to avoid a shiny aspect. This operation can be repeated several times to get a smooth surface.
4) To insure adhesion, apply one coat of RENOV 3231 RC if necessary. Dry
5) Apply 2 or 3 coats of the mixure 4. Let it dry completely.

6) Fix with one coat of TOP RENOV 3388 RC

COMMENTS
Nota : Step 6 : FIXATION : to get a dull effect, it is possible to add TOP MAT 3627 RC (about 50 to 80 gr of TOP MAT 3627 RC in one kilo of TOP RENOV 3388 RC). To get a "two tons effect" it is possible to add about 40 to 60 gr of RENOVANILIN RC in one kilo fo TOP RENOV 3388 RC.

Renovation type :
RENOVATION OF NAPPAVEL ON DOUBLE FACE ITEMS


PRODUCTS 1 2 3 4
IMPER SUPER 1283 RC 1000      
         
Mélange pour huilé 4045 RC   1000    
         
Mélange pour huilé 4045 RC     950  

"+ pigment OPANOL RC"

    50  
"or + COLORANT 400 RC RC"     50  
TOP RENOV 3388 RC       1000
  1000 1000 1050 1000
PROCESS
1)Apply one heavy coat of WATERPROOF SRC
2) Apply two thin coats of the mixture n° 2.
3) In order to isolate the base coat of the 4045 RC iron, applied a siliconed paper between leather and iron. Press to stick the base coat n° 2.
4) Apply again a thin coat of the mixture for nappavel 4045 RC alone if transparent finishing or with pigment RENOVCOLOR RC or dyes RENOVANILIN RC according to the required aspect.
5 )Fix with TOP RENOV 3388 RC (colourless or coloured with RENOVANILIN RC)
Renovation type :
RENOVATION OF OILISH NUBUCK


PRODUCTS 1
COLOURLESS SELF FIXING
PASTE 3855 RC
970
RENOVCOLOR RC 30
  1000
PROCESS
Stir well the mixture before use and apply on leather. Application by hand : sponge, brush, cotton bud , etc…..
 
 

Renovation type :
RENOVATION OF WAXED TEXTILE JACKETS BY HAND


PRODUCTS 1
CIRE POUR VESTE 3897 RC 1000
   
  1000
PROCESS
1) When the garment has been dry-cleaned
apply the CIRE POUR VESTE 3897 RC
by hand, spread carefully.
2) Put the garment in a steam machine
or warmed drum to inside the wax in the fibers.
tis operation is recommended but not obligatory.
 

NOTA : Although our formulations are issued to the best of our knowledge, we cannot take any responsibility.